Chemicals Stripper/Cleaner Sales

Blue Bear 600GL Coatings Remover 1Gal


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: Franmar

Model: BB 600GL 1Gal

Quantity:

Additional Information

Easily Remove MULTIPLE LAYERS of
* Paints and Lead-based paints
* Urethanes and Polyurethanes
* Concrete Acrylics and Sealers
* Epoxies - single and two part
Made with 100% American Grown Soybeans, SOY Gel does all that and more.
SOY-Gel Product Data Sheet For General and Restoration
SOY Gel is an industrial strength and consumer friendly paint, varnish, and urethane remover made with 100% American grown soybeans. The low evaporation rate of SOY-Gel and its gel formulation make it possible to remove several layers of paint in one application. During the removal of lead based paint, lead becomes encapsulated in the gel, preventing airborne lead particles, allowing for safe and easy disposal. SOY-Gel contains no methylene chloride, is not an alkaline based stripper and cleans up easily with water. Unlike more traditional paint strippers SOY-Gel lets you work without the odor. Indoors or outdoors, you can be guaranteed a safe restoration process with SOY-Gel.
APPLICATION:
Due to variances in concrete surfaces and conditions, test in a small, inconspicuous area before using on complete project. SOY-Gel is safe to use on wood, brick, stone, metal, plaster, concrete, and many other surfaces. Do not use on plastic, PVC, rubber or dry wall. SOY Gel may be used indoors or outdoors. When used outdoors, protect plant and vegetation with a plastic drop cloth. SOY Gel may be used on vertical as well as horizontal projects.
Apply a thick, even layer of SOYGel, generally between 1/16 and 1/8 inch to the coating to be removed by using pouring, brushing, or airless sprayer (piston pumped with tip of 519 or similar). If applying with brush, do not apply as you would paint. Don t brush or scrape the surface until the stripper has had time to work. Check the progress of the stripping action by using a scraper to see if the coating is softened down to the surface. If not, wait longer and recheck. SOY-Gel will remain wet and working for several hours. Longer is better. Let the stripper do the work. If SOY-Gel is left to sit outdoors, cover with a light plastic drop cloth to prolong the stripper's wet time. Once the coating is softened, remove it with a scraper, industrial wet vacuum, or other stripping tool. Reapply stripper, if necessary. Repeat steps above. After use, clean remaining thin residue with Franmar's EMERGE or water, using a scrub brush and/or mop or power washer. Ensure to scrape or vacuum excess removed coating and SOY-Gel before using a power washer for final cleaning. Always use care to prevent over spray from getting on surfaces other than the one being prepped. Allow surface to dry before further preparations.
Flash Point: Above 200 F
pH Level: 8.1 pH of 1/10
wt/wt solution in soft water.
Vapor Pressure: Not determined
Odor: Mild Odor
Conditions to avoid: Strong oxidizing agents.
Health Hazards: May cause moderate eye irritation.
May cause delayed skin irritation. May be harmful if
swallowed in large amounts.
Packaged: Quart, Gallon, 2 1/2 Gallon, Five Gallon,
55 Gallon Drum
Coverage:
Horizontal - Up to 200 sq. ft. per gallon
Vertical - Up to 130 sq. ft. per gallon Common Uses
Lead-based paint removal
Latex paint removal
Enamel paint removal
Single and Two part epoxies
(two part solid count must be lower than 40%)
Urethane removal
Varnish removal
Concrete sealer removal
SOY-Gel Product Data Sheet For Concrete Coatings Removal
SOY Gel is an industrial strength and consumer friendly paint, urethane, epoxy and acrylic stripper made with 100% American grown soybeans. The low evaporation rate of SOY Gel and its gel formulation make it possible to remove several layers in one application. SOY-Gel will not lighten any acid stained, color hardened and integrally colored concrete surfaces (will lighten or remove solvent dyes and water-based stains). SOY-Gel contains no methylene chloride, is not an alkaline based stripper and cleans up easily with water. Unlike more traditional paint strippers SOY Gel lets you work without the odor. Indoors or outdoors, you can be guaranteed a safe restoration process with SOY Gel.
APPLICATION:
Due to variances in concrete surfaces and conditions, test in a small, inconspicuous area before using on complete project. SOY-Gel is safe to use on concrete, brick, stone, metal, plaster, wood, and many other surfaces. Do not use on plastic, PVC, rubber or dry wall. SOY-Gel may be used indoors or outdoors. When used outdoors, protect plant and vegetation with a plastic drop cloth. SOY-Gel may be used on vertical as well as horizontal projects.
Apply a thick, even layer of SOY Gel, generally between 1/16 and 1/8 inch to the coating to be removed by using a gauge rake, squeegee rake, or airless sprayer (piston pumped with tip of 519 or similar). Don t brush or scrape the surface until the stripper has had time to work. Check the progress of the stripping action by using a scraper to see if the coating is softened down to the surface. If not, wait longer and recheck. SOY-Gel will remain wet and working for several hours. Longer is better. Let the stripper do the work. If SOY-Gel is left to sit outdoors, cover with a light plastic drop cloth to prolong the stripper's wet time. Once the coating is softened, remove it with a scraper, industrial wet vacuum, or other stripping tool. Reapply stripper, if necessary. Repeat steps above. After use, clean remaining thin residue with Franmar's EMERGE or water, using a scrub brush and/or mop or power washer. Ensure to scrape or vacuum excess removed coating and SOY-Gel before using a power washer for final cleaning. Always use care to prevent over spray from getting on surfaces other than the one being prepped. Allow surface to dry before further preparations.
Flash Point: Above 200 F
pH Level:8.1 pH of 1/10
wt/wt solution in soft water.
Vapor Pressure: Not determined
Odor: Mild Odor
Conditions to avoid: Strong oxidizing agents.
Health Hazards: May cause moderate eye irritation.
May cause delayed skin irritation. May be harmful if
swallowed in large amounts.
Packaged: Quart, Gallon, 2 1/2 Gallon, Five Gallon,
55 Gallon Drum
Coverage:
Horizontal - Up to 200 sq. ft. per gallon
Vertical - Up to 130 sq. ft. per gallon Common Uses
Concrete hard surface sealer removal
Acrylic removal
Lead-based paint removal
Paint removal
Single & two part epoxies
(two part solid count must be lower than 40%)
Urethane & Varnish removal

* Prices are subject to change.

* Please call us for any questions on our blue bear 600gl coatings remover 1gal in Pasco WA, Kennewick WA, Richland WA, La Grande OR, Pendleton, and Baker City OR.