Chemicals Stripper/Cleaner Sales

Blue Bear BEAN-e-doo Mastic Remover 1G


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: Franmar

Model: 4092609128

Quantity:

Additional Information

BEAN-e-doo Mastic Remover is not recommended for use on wood surfaces. Using BEAN-e-doo might slightly darken a concrete surface!!
Remove:
* Asbestos Mastic
* Vinyl Mastic
* Ceramic Tile Mastic
Coverage:
* Asbestos - Up to 250 sq. ft. per gallon
* Vinyl - Up to 200 sq. ft. per gallon
* Ceramic - Up to 150 sq. ft. per gallon
Easy to apply and even easier to remove and dispose of (land-fill friendly). 100% biodegradable, non-toxic and non-caustic - makes negative air, or other special equipment unnecessary. Very economical. Low evaporative rate allows it to continue to work for up to 24 hours. Allowing it to do the work saves labor. LESS LABOR = MORE PROFIT! After extensive testing, a U.S. Postal Authority said, "BEAN e doo does the trick, with money savings of almost 300%. Furthermore, it is unusual for only one product to meet all the criteria of the U.S. Postal Service."
APPLICATION:
Pour BEAN-e-doo Mastic Remover undiluted directly to the substrate. Use a long handled brush or broom to ensure BEAN-e-doo at least covers all trowel ridges. Allow BEANedoo Mastic Remover to sit until mastic softens (generally 45-60 minutes for asbestos mastic. Dwell time for vinyl and acrylic mastics are longer, in some cases up to 4 hours.) After mastic has softened, remove with a long handled scraper or squeegee. Mop surface with water and let dry before applying new mastic or coating. In all cases, care should be taken not to over saturate the floor by using too much water. Rotary floor machines are not recommended for cleanup unless an area has been tested first.
For porous and/or cracked substrates, use a commercial absorbent to help in pick up of mastic residue. Use a degreasing agent such as Franmar Chemical's EMERGE when mopping surface.
Testing surface for residue after floor has been mopped: Apply water to various small spots on the substrate. If water turns cloudy white, it indicates there is BEAN-e-doo Mastic Remover on the surface. Remop using a degreaser is recommended. Then retest.
Flash Point: Above 425?F
pH Level: 6.65 pH of 1/10
wt/wt solution in soft water.
Vapor Pressure: Less than 1 mmHg
at 72?F
Odor: Light odor
Conditions to avoid: Strong oxidizing agents, rags
soaked with other solvents or chemicals.
Health Hazards: None known
Packaged: Quart, Gallon, Five Gallon,
55 Gallon Drum
Area Coverage: up to 200 sq. ft. per gallon
Volatile Organic Compouds (VOC) less than 3%
Usage Tips:
Do not exceed the recommended coverage. Applying too much BEAN-e-doo does not increase removal time, but does contribute to impeding the complete removal of residue.
Some vinyl and latex mastics will require longer sit times before softening.
For thick mastics, reduce suggested sq. ft. coverage.
For best results for cleanup, remove mastic with long handled scraper, then use a commercial absorbent to ensure pick up of mastic residue. Next mop floor using Franmar s Emerge degreaser.

* Prices are subject to change.

* Please call us for any questions on our blue bear bean e doo mastic remover 1g in Pasco WA, La Grande OR, Pendleton, and Baker City OR.